Skip to Content

Corten Steel Flat Face Edging How To

Cor-ten-steel.co.uk ship steel garden edging all over the Aus

Metal garden edging is quick and easy to install and shipped flat packed


Edge Height

Around 1/3rd of the edging may be buried, which provides additional support to the edge.

Flat Face Peg Length

Pegs should be at least 100mm longer than your selected edging, in softer soils use longer pegs

Preformed Curves

Use preformed corners and curves to create unique garden layouts

Concrete Haunching

For high stress applications, concrete haunching adds strength.

Haunching example

Flat Top can not be bent on site, you will need to swap to Flat Face edging

Temporary stakes, until concrete sets

For gentle curves, Flat Face edging can be bent into gentle curves. Flat Top can not be bent.

Corten edging available in

100mm, 150mm, 200mm, 300mm tall

Small gaps at joins will be hidden by pegs

Corten is supplied as “blue steel” unweathered, Weathering takes 3-12 months of wet dry cycles

Close up of join

Maintenance free tidy edges

Different Height

Joining different height edging behind peg joiner

Rounding off End

Using an angle grinder to round the corten end

Step up string lines for height and direction

To get the best results check the assembled edging, before setting the posts in concrete

Edging peg joint

Increased strength by burying up to 1/3 of edging

Pre-made corners

We have both round and square corner pieces

Pre-made corners quarter section

Corten steel is a high tensile steel, however our DIY friendly curves in solid 3mm and 6mm thick edging, make tight radii simple to install.

Preformed Curves and Corners

Full selection of curves and corner joiners available

Peg fold fits snuggly over edging

The 3mm peg is designed to securely join the corten edge pieces. In softer soils you may need longer pegs

Install Flat Face pegs with a hammer

In summer soften the soil the night before, to make it easier to drive the pegs in.

Do not hammer Flat top edging in, set support posts in holes filled with concrete

String line and profile set up

Coating buried corten with bitumen paint will increase the lifespan

Install corten 1st

Then cut paving to fit. Place concrete paths after edging is installed

Complex shapes no problem

This shape uses the following parts. 90deg corner, 45deg corner, quarter circle, straight lengths and joining pegs

Eighth pre-made curved section

This layout uses, 90deg, 45deg, pre-made eighth curve, straight lengths and joiner pegs

Rounded corners

Quarter segments come in various radii from 300mm up to 1200mm

​

Using temporary stakes

Once the paving and gardens are in place, the stakes can be removed

Concrete around the peg base

For some projects using longer pegs and a small amount of concrete around the peg base, supports the edging prior to the paving and soil being placed

[email protected]

Please email me any, sketches, plans, and other information you may have,

I can then get back to you with suggested corten

4 quarters make a full circle

Quarter segments come in various radii from 300mm up to 1200mm. Ideal for around existing trees

Concrete around the peg base

For some projects using longer pegs and a small amount of concrete around the peg base, supports the edging prior to the paving and soil being placed

[email protected]

Please email me any, sketches, plans, and other information you may have,

I can then get back to you with suggested corten

 radius on top

Child and pet friendly edging has a smooth rolled edge on the straight sections

Oct 2026